Duplo ULTRA 200PRO - Page 47

47
3
UV Lamp
C/A
Clean the UV lamp and
reflector
4
Curing Conveyor
Driving Belt
A
Make sure the belts are
tight. If the belts
become loose then
adjust the tension or
change the belt.
5
Air Blower
C/A
As the blower fan blade
will collect dust particles
it is recommend to clean
it every three months.
6
UV Oil Tray
C
Clean the oil drip tray
after every job has been
completed, or when
changing the UV coating
oil.
7
Scraper Blade
C/A
Cleaning periodically is
necessary
8 C
Clean the tray below UV
oil circulation tray every
quarter to make sure no
coating is dripped on to
it and causing overflow
and damage harness