Working basis
14 Service Instructions 171/173 - 00.0 - 01/2020
Fig. 1: Handwheel positions
To lock the machine in place at a specific position:
1. Turn the handwheel to the desired position.
2. Insert the locking peg (1) into the hole (2).
The locking peg (1) is seated in the corresponding slot of the adjusting
disk (3).
The machine has been locked in place.
(1) - Locking peg
(2) - Hole
(3) - Adjusting disk
①② ①② ③
Rotational direction of the machine
B
C
A
F
E
D
To Next Page
Loading...
