DURKOPP ADLER 171 - User Manual

Other manuals for DURKOPP ADLER 171

Service Instructions92 pages

Operating Manual84 pages

Questions and Answers:

J
Jason WilliamsAug 8, 2025
Why is the thread breaking on my DURKOPP ADLER Sewing Machine?
- A
  Ashley PatelAug 8, 2025
  Thread breakage in your DURKOPP ADLER Sewing Machine can occur due to several reasons: the needle thread and looper thread might not be threaded correctly, the needle could be bent or sharp-edged, or it might not be inserted correctly into the needle bar. The thread used may be unsuitable, or the thread tensions might be too tight for the thread. Also, check if thread-guiding parts are sharp-edged and whether the throat plate, looper, or spread have been damaged by the needle. To resolve this, check the threading path, replace the needle if necessary, ensure correct needle insertion, use the recommended thread, and check thread tensions. If parts are damaged, have them reworked by qualified specialists.
J
jamie56Aug 12, 2025
What to do if my DURKOPP ADLER Sewing Machine is skipping stitches?
- P
  pshermanAug 12, 2025
  Missing stitches on your DURKOPP ADLER Sewing Machine can be caused by several factors. The needle thread and looper thread might not be threaded correctly. The needle could be blunt or bent, or not correctly inserted into the needle bar. The needle thickness used might be unsuitable, or the reel stand could be installed incorrectly. Thread tensions might also be too tight, or the throat plate, looper, or spread could be damaged by the needle. Suggested solutions include checking the threading path, replacing the needle, ensuring correct needle insertion, using the recommended needle thickness, checking the assembly of the reel stand, and checking thread tensions. If the throat plate, looper, or spreader are damaged, have parts reworked by qualified specialists.
T
Tammy WarrenAug 17, 2025
How to fix loose stitches on a DURKOPP ADLER 171?
- A
  Albert PattersonAug 17, 2025
  Loose stitches on your DURKOPP ADLER Sewing Machine may occur if the thread tensions are not adjusted to the sewing material, the sewing material thickness, or the thread used. Another cause may be that the needle thread and looper thread have not been threaded correctly. To solve this, check thread tensions and the threading path.
J
Jennifer BowmanAug 20, 2025
How to stop my DURKOPP ADLER 171 Sewing Machine from unthreading at the seam beginning?
- T
  Timothy LynnAug 20, 2025
  Unthreading at the seam beginning with your DURKOPP ADLER Sewing Machine can occur if the needle thread tension is too firm. You should check the needle thread tension.
A
April MendezAug 25, 2025
Why is my DURKOPP ADLER 171 thread breaking?
- J
  Jessica WestAug 26, 2025
  Thread breakage in your DURKOPP ADLER Sewing Machine can occur for several reasons. The needle thread and hook thread might not be threaded correctly, so check the threading path. The needle could be bent or sharp-edged, in which case you should replace it. Ensure the needle is correctly inserted into the needle bar. The thread used might be unsuitable, so switch to a recommended thread. Also, thread tensions might be too tight for the thread being used, so check them. Sharp-edged thread-guiding parts, such as the thread tube, thread guide, or thread take-up disk, can also cause breakage, so check the threading path. Finally, the throat plate, hook, or spread may have been damaged by the needle, requiring rework by qualified specialists.
N
Nicole ContrerasAug 29, 2025
What to do if my DURKOPP ADLER 171 Sewing Machine skips stitches?
- M
  Melissa CruzAug 29, 2025
  If your DURKOPP ADLER Sewing Machine is skipping stitches, several factors could be responsible. First, ensure that the needle thread and hook thread are correctly threaded by checking the threading path. Next, verify that the needle isn't blunt or bent; if it is, replace it. Also, confirm that the needle is correctly inserted into the needle bar. Make sure you are using the recommended needle thickness. An incorrectly assembled reel stand can also cause skipped stitches; check its assembly. If the thread tensions are too tight, check and adjust them. Lastly, the throat plate, hook, or spread may have been damaged by the needle, requiring rework by qualified specialists.
T
Thomas KimSep 3, 2025
What to do if DURKOPP ADLER Sewing Machine has loose stitches?
- S
  Susan MillerSep 3, 2025
  If your DURKOPP ADLER Sewing Machine has loose stitches, it could be because the thread tensions are not adjusted to the sewing material, the sewing material thickness, or the thread used. Check the thread tensions to resolve this. Also, ensure that the needle thread and hook thread have been threaded correctly by checking the threading path.