Setup
76 Operating Instructions 171/173 - 02.0 - 09/2019
7.5 Setting the working height
The working height can be adjusted continuously between
750 and 900 mm
WARNING
Risk of injury from moving parts!
The tabletop can sink under its own weight when
the screws on the stand bars are loosened.
Crushing possible.
Ensure that your hands are not jammed when
loosening the screws.
CAUTION
Risk of musculoskeletal damage from
incorrect setting!
The operator can sustain musculoskeletal
damage if failing to comply with the ergonomic
requirements.
Adjust the working height to the body height of the
person who will operate the machine.
To Next Page
Loading...
Need help?
General
