Troubleshooting
96 Operating Instructions 171/173 - 02.0 - 09/2019
10.2 Errors in sewing process
Error Possible causes Remedial action
Unthreading
at seam
beginning
Needle thread tension is
too firm
Check needle thread
tension
Thread
breaking
Needle thread and looper
thread have not been
threaded correctly
Check threading path
Needle is bent or
sharp-edged
Replace the needle
Needle is not inserted
correctly into the needle
bar
Insert the needle correctly
into the needle bar
The thread used is
unsuitable
Use recommended thread
Thread tensions are too
tight for the thread used
Check thread tensions
Thread-guiding parts, such
as thread tube, thread
guide or thread take-up
disk, are sharp-edged
Check threading path
Throat plate, looper or
spread have been
damaged by the needle
Have parts reworked by
qualified specialists
To Next Page
Loading...
Need help?
General
