Maintenance
Operating Instructions 171/173 - 02.0 - 09/2019 63
To clean the machine:
1. Switch off the machine.
2. If present, disassemble the edge pinker ( p. 51).
3. Remove any lint and thread remnants using a compressed
air gun or a brush.
4. If present, empty the waste bin of the edge pinker.
6.2 Lubricating
The machine is equipped with a central oil-wick lubrication system.
The bearings are supplied from the oil reservoir.
CAUTION
Risk of injury from contact with oil!
Oil can cause a rash if it comes into contact with
skin.
Avoid skin contact with oil.
If oil has come into contact with your skin, wash
the affected areas thoroughly.
NOTICE
Property damage from incorrect oil!
Incorrect oil types can result in damage to the machine.
Only use oil that complies with the data in the instructions.
CAUTION
Risk of environmental damage from oil!
Oil is a pollutant and must not enter the sewage
system or the soil.
Carefully collect up used oil.
Dispose of used oil and oily machine parts in
accordance with national regulations.
To Next Page
Loading...
Need help?
General
