Maintenance
64 Operating Instructions 171/173 - 02.0 - 09/2019
For topping off the oil reservoir, use only lubricating oil DA 10 or
oil of equivalent quality with the following specifications:
• Viscosity at 40 °C:10 mm
2
/s
• Flash point: 150 °C
You can order the lubricating oil from our sales offices using the
following part numbers.
6.2.1 Lubricating the machine head
Proper setting
The oil level is between the MIN-marking and the MAX-level
marking.
Fig. 33: Lubricating the machine head
To lubricate the machine head:
1. Switch off the machine head.
2. Pour oil through the refill opening (1) to the MAX-marking (2).
Container Part no.
250 ml 9047 000011
1 l 9047 000012
2 l 9047 000013
5 l 9047 000014
(1) - Refill opening
(2) - MAX-marking
(3) - MIN-marking
To Next Page
Loading...
Need help?
General
