Decommissioning
Operating Instructions 171/173 - 02.0 - 09/2019 91
8 Decommissioning
To decommission the machine:
1. Switch off the machine.
2. Unplug the power plug.
3. If applicable, disconnect the machine from the compressed
air supply.
4. Remove residual oil from the oil pan using a cloth.
5. Cover the control panel to protect it from soiling.
6. Cover the control to protect it from soiling.
7. Cover the entire machine if possible to protect it from contam-
ination and damage.
WARNING
Risk of injury from a lack of care!
Serious injuries may occur.
ONLY clean the machine when it is switched off.
Allow ONLY trained personnel to disconnect the
machine.
CAUTION
Risk of injury from contact with oil!
Oil can cause a rash if it comes into contact with
skin.
Avoid skin contact with oil.
If oil has come into contact with your skin, wash
the affected areas thoroughly.
To Next Page
Loading...
Need help?
General
