Programming
60 Operating Instructions 171/173 - 02.0 - 09/2019
5.1 Edge pinker
5.1.1 Setting the parameters
The following parameters can be set for the edge pinker:
5.1.2 Activating the chain cutter
To a c t i v a t e t he c h a i n cu t t e r , press the button on the control
panel.
Parameter Description
Operator level
o 13 00 Suction/needle cooling
0 = OFF
1 = ON
Technician level
t 13 01 Switch-off delay suction
Value range: 9,999 - 2,500 seconds
To Next Page
Loading...
