DURKOPP ADLER 171 - Lubricating the Looper

Maintenance
Operating Instructions 171/173 - 02.0 - 09/2019 65
6.2.2 Lubricating the looper
Fig. 34: Lubricating the looper
To lubricate the looper:
1. Switch off the machine.
2. Tilt the machine head.
3. Loosen the screw (1).
4. Pour in oil to the MAX-marking (3).
5. Tighten the screw (1).
6. Erect the machine head.
(1) - Screw
(2) - Oil reservoir
(3) - MAX-marking
(4) - MIN-marking
④
①
②
③