Operation
Operating Instructions 171/173 - 02.0 - 09/2019 53
4.14 Sewing
Sewing process
Initial position of the machine before sewing starts.
• The main switch is switched on.
• The pedal (1) is in rest position (POS 0).
• The machine is at a standstill.
• The needle is up.
• The sewing feet are down.
• The last sewing process is completed by cutting off the thread.
Fig. 31: Sewing
To sew:
1. Press the pedal (1) to POS. -1.
Lift the sewing feet.
2. Slide the sewing material up to the needle.
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
NEVER hold your hands in the area of the sewing
feet and needle when sewing.
(1) - Pedal
To Next Page
Loading...
Need help?
General
