Edge pinker
54 Service Instructions 171/173 - 00.0 - 01/2020
12 Edge pinker
12.1 Disassembling the edge pinker
Fig. 43: Disassembling the edge pinker
To disassemble the edge pinker:
1. Move the lever (2) to the right.
Make sure the lever (2) snaps into place.
2. Loosen the screw (1).
WARNING
Risk of injury from sharp parts!
Cutting injuries may be sustained.
Do NOT reach into the knife blades.
CAUTION
Risk of injury from moving parts!
Crushing possible.
Do NOT reach into the area of the edge cutter.
(1) - Screw
(2) - Lever
(3) - Edge pinker
To Next Page
Loading...
