Error code Description Remedy
8252
8257
8258
-
8256
8254
Error booting ADSP/ Booting Xilinx/ Booting
Fault
- Switch the machine off and on
again
8351 Error t estpins
- Switch the machine off and on
again
- Software update
- Inform the DA-Service
9601 Stop during sewing on the contour
Continue sewing process?
OK-key = Continue sewing
ESC-key = Abort sewing process
9700 The latch for the bobbin change is not closed
Close the latch for the bobbin
change
9701 Parallel clamp not down
- Remove obstacles
- Align the sensors
9900 Machine parameters faulty
Initialize data
9901 Faulty sequences
Initialize data
9902 Faulty program parameters
Initialize data
62
To Next Page