dymax BlueWave 200 - Unpacking the Bluewave 200; Unpacking and Inspecting Your Shipment; Parts Included with the Bluewave 200 Spot Lamp

9
Dymax BlueWave® 200 Version 3.0 User Guide
Unpacking the BlueWave 200
Unpacking and Inspecting Your Shipment
When your BlueWave 200 arrives, inspect the boxes for damage and notify the shipper of box damage
immediately.
Open each box and check for equipment damage. If parts are damaged, notify the shipper and submit a claim
for the damaged parts. Contact Dymax so that new parts can be shipped to you immediately.
Check that the parts included in your order match those listed below. If parts are missing, contact your local
Dymax representative or Dymax Customer Support to resolve the problem.
NOTE: Lamps are shipped with the bulb/reflector installed.
Figure 2. BlueWave 200 Rev 3.0 Components
Parts Included with the BlueWave 200 Spot Lamp
■ BlueWave 200 Rev. 3.0 Spot Lamp (1)
■ Power Cord (2)
41015 – North American Version with 115V Power Cord
41014 – Asian Version with Type G Plug
41013 – No Power Cord (NOTE: For European customers, the appropriate power cord will be added)
■ Foot Pedal (3)
■ Protective Goggles (4)
■ Hex Key (5)
■ Screwdriver (6)
■ Intensity Adjustment Knob and Screw (7)
■ BlueWave 200 User Guide (8)
1
2
3
4
5
6
7
8