Dymo LabelWriter - Connecting to a Labelwriter over a Network; Other Networking Solutions

43
Appendix A
Networking the
LabelWriter
This appendix describes the networking aspects
of the LabelWriter printer.
Connecting to
a LabelWriter
Over a
Network
The LabelWriter is a stand-alone device. Any
attempt to print to a LabelWriter through a
LocalTalk adapter will fail. The only way to
connect a LabelWriter to a network is to use
Stalker Software’s Portshare Pro. For more
information, contact Stalker Software at
(800) 262-4722 or (415) 383-7164 or visit their
Web site at www.stalker.com.
Other
Networking
Solutions
For the latest information on networking the
LabelWriter, visit our Web site at
www.dymo.com/support.