EasyManuals Logo

Dynacord PM 502 User Manual

Dynacord PM 502
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Safety
Danger!
The lightning symbol inside a triangle notifies the user of high-voltage, uninsulated lines and
contacts inside the devices that could result in fatal electrocution if touched.
!
Warning!
An exclamation mark inside a triangle refers the user to important operating and service
instructions in the documentation for the equipment.
1. Read these safety notes.
2. Keep these safety notes in a safe place.
3. Heed all warnings.
4. Observe all instructions.
5. Do not operate the device in close proximity to water.
6. Use only a dry cloth to clean the unit.
7. Do not cover any ventilation slots. Always refer to the manufacturer's instructions when
installing the device.
8. Do not install the device close to heaters, ovens, or other heat sources.
9. Note: The device must only be operated via the mains power supply with a safety ground
connector. Do not disable the safety ground connection function of the supplied power
cable. If the plug of the supplied cable does not fit your mains socket, please contact
your electrician.
10. Ensure that it is not possible to stand on the mains cable. Take precautions to ensure the
mains cable cannot become crushed, particularly near the device connector and mains
plug.
11. Only use accessories/extensions for the device that have been approved by the
manufacturer.
12. Unplug the device if there is risk of lightning strike or in the event of long periods of
inactivity. However, this does not apply if the device is to be used as part of an
evacuation system!
13. Have all service work and repairs performed by a trained customer service technician
only. Service work must be carried out immediately following any damage such as
damage to the mains cable or plug, if fluid or any object enters the device, if the device
has been used in rain or become wet, or if the device has been dropped or no longer
works correctly.
14. Please ensure that no dripping water or spray can penetrate the inside of the device. Do
not place any objects filled with fluids, such as vases or drinking vessels, on top of the
device.
1
4 en | Safety PM 502
15-May-14 | 02 | F01U297804 User manual Bosch Sicherheitssysteme GmbH

Other manuals for Dynacord PM 502

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynacord PM 502 and is the answer not in the manual?

Dynacord PM 502 Specifications

General IconGeneral
TypeStand mixer
Product colorBlack
DJ mixer-
USB portYes
Rack capacity7U
Video capabilityNo
USB connector typeUSB Type-B
Sample rate48 kHz
Amplifier classD
Frequency range15 - 22000 Hz
Channels quantity8 channels
Amplifier output power1200 W
Supported sample rates32, 44.1, 48 kHz
Digital sound processing48 bit
Audio A/D Converter (ADC)16-bit, delta-sigma
Equalizer bands quantity7
Master (XLR) out1
Line inputs (RCA)2
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of microphone inputs5
Phantom power48 V
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)180 W
Weight and Dimensions IconWeight and Dimensions
Depth241 mm
Width395 mm
Height244 mm
Weight4900 g
Package weight6400 g

Related product manuals