Need help?Do you have a question about the Dynacord PM 502 and is the answer not in the manual?
General| Type | Stand mixer |
|---|---|
| Product color | Black |
| DJ mixer | - |
| USB port | Yes |
| Rack capacity | 7U |
| Video capability | No |
| USB connector type | USB Type-B |
| Sample rate | 48 kHz |
| Amplifier class | D |
| Frequency range | 15 - 22000 Hz |
| Channels quantity | 8 channels |
| Amplifier output power | 1200 W |
| Supported sample rates | 32, 44.1, 48 kHz |
| Digital sound processing | 48 bit |
| Audio A/D Converter (ADC) | 16-bit, delta-sigma |
| Equalizer bands quantity | 7 |
| Master (XLR) out | 1 |
| Line inputs (RCA) | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Number of microphone inputs | 5 |
| Phantom power | 48 V |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 180 W |
Weight and Dimensions| Depth | 241 mm |
|---|---|
| Width | 395 mm |
| Height | 244 mm |
| Weight | 4900 g |
| Package weight | 6400 g |
To Next Page
