13
CA 150 O150EN2
BEFORE STARTING
2
1
1
1
2
The engine hood must be unlocked during
operation, so that battery power can be
disconnected quickly if necessary.
Battery disconnecter
– Switching ON
Fig. 8 Engine compartment
1. Battery disconnecter
2. Hourmeter
Remember to carry out daily service. See maintenance
manual.
The battery disconnecter is located in the engine
compartment. Open the engine cover and set the key
(1) to the ON position. The entire roller will be powered.
The hourmeter (2) records the number of hours so long
as the engine is running.
WARNING
Operator’s seat – Setting
Adjust the operator’s seat to ensure a comfortable
posture and so that all controls are within easy reach.
The seat can be adjusted as follows:
Length adjustment (1)
Always make sure that the seat is secure
before beginning operation.
Fig. 9 Operator’s seat
1. Locking lever - length adjustment
WARNING
Operator’s seat in cab (Optional)
– Setting
Fig. 10 Operator’s seat
1. Locking lever – length adjustment
2. Lever – weight adjustment
Set the operator’s seat in a comfortable position and so
that the controls are easily accessible.
The seat has the following adjustment facilities:
• Length adjustment (1).
• Weight adjustment (2).
Always make sure that the seat is secure
before beginning operation.
WARNING
To Next Page
Loading...
