Dynapac DR6X - Page 71

9. Disassemble the left engine guard.
10. Pull the air feed hose (1) and the hose clamp (2) off the cover
(3).
11. Unscrew the fastening screws (1).
12. Disassemble the cover and air filter (2).
13. Wipe the inside of the air filter housing with a clean cloth.
14.
CAUTION!
Danger of eye injuries caused by particles
flying around!
– Wear your personal protective equipment
(safety gloves, protective working
clothes, goggles).
Blow the air filter out from inside to outside with dry com-
pressed air (max.
2 bar (29 psi)), until all dust has been
removed.
15. Check seals and air filter for damage.
16. Replace the air filter if it is damaged.
B-924-0008
Fig. 47
1
3
2
B-541-0072
Fig. 48
1
2
B-541-0081
Fig. 49
B-541-0082
Fig. 50
Maintenance – Weekly
DR6X
71