E Instruments BTU900 - Page 19

19
K800000000EJ 020650A0 170512
1
2
3
4
5
6
7
8
▲
Sensors Config.
Sensors diagnostic
Gas Path Check
Memories diagnostic
►Info Service
▼
INFORMATION
E Instruments
Tel.(215)750-1212
Fax.(215)750-1399
900
SN:000001 Ver:1.00
PN:000000
INFO SERVICE
Probe SN --------
EXTERNAL PROBE
▲
Sensors diagnostic
Gas Path Check
Memories diagnostic
Info Service
►External pobe
INFORMATION
Battery status
Sensors Config.
Sensors diagnostic
►Gas Path Check
Memories diagnostic
▼
INFORMATION
Connect to port P-
Apply cap to probe
Press OK to start
GAS PATH CHECK
Battery status
Sensors Config.
Sensors diagnostic
Gas Path Check
►Memories diagnostic
▼
INFORMATION
Memories ok
Calibration ok
MEMORIES DIAGNOSTIC
Connect to port P-
Apply cap to probe
Press OK to start
Please wait ...
GAS PATH CHECK
Connect to port P-
Apply cap to probe
Press OK to start
Result: leak
GAS PATH CHECK
Connect the flue gas sampling probe and f ilter unit assembly to the
instrument;
Fully insert the black rubber cap on the gas probe tip, as shown in the
following picture:
Black rubber cap