E Instruments BTU900 - Default Chapter; Table of Contents

3
K800000000EJ 020650A0 170512
1.0 INTRODUCTION 05
1.1 General Description of the Combustion Analyzer 05
1.2 General features of the Combustion Gas Analyzer 05
1.3 BTU900 Main configurations 06
2.0 TECHNICAL SPECIFICATIONS 07
2.1 Technical Specifications 07
2.2 Overview of Flue Gas Analyzer Components 08
2.3 Measurement and Accuracy Ranges 11
3.0 USING THE COMBUSTION FLUE GAS ANALYZER 12
3.1 Preliminary operations 12
3.2 Warnings 12
3.3 Analyzer power supply 12
3.3.1 Checking and replacing the batteries 12
3.3.2 Use with external power pack 12
4.0 OPERATION 14
4.1 Working principle 14
4.2 Measurement cells 14
4.3 Connecting the Sampling probe 14
4.4 Condensate (water) trap and fine dust filter 14
4.5 Connecting the SMART Incoming Air temperature probe 15
4.6 Connecting the TcK probe 15
4.7 Keypad overview 16
4.8 Info Menu 17
4.8.1 Flow Chart - Info Menu 18
4.9 Analysis configuration menu 20
4.9.1 Flow Chart - Analysis configuration menu 22
4.10 Instrument configuration menu 27
4.10.1 Flow Chart - Instrument configuration menu 28
4.11 Memory Menu 30
4.11.1 Flow Chart - Memory Menu 31
4.12 Print Menu 33
4.12.1 Flow Chart - Print Menu 34
4.13 Analysis Menu 36
4.13.1 Zoom Menu 36
4.13.2 Flow Chart - Analysis Menu (Zoom) 37
4.14 Draft Menu 39
4.14.1 Flow Chart - Draft Menu 39
4.15 Readings Menu 40
4.15.1 Flow Chart - Readings Menu 41
4.16 Flow Chart - Configure Analysis Menu 42
4.17 Flue Gas Analysis 43
4.17.1 Switching on the instrument and auto-calibration 43
4.17.2 Inserting the probe inside the stack 43
4.17.3 Flue Gas Analysis 43
4.17.4 End of Analysis 44
4.17.5 Flow Chart - Flue Gas Analysis 45
4.18 Measuring the Differential Pressure (optional kit) 49
TABLE OF CONTENTS
TABLE OF CONTENTS TABLE OF CONTENTS
TABLE OF CONTENTS