33
K800000000EJ 020650A0 170512
4.12 Print Menu
This menu is used to access the following print and check configurations:
Print report:
Shows the details of the selected ticket type and allows to start printing.
Print set:
Copies: Allows to set the number of printed copies and layout of the ticket
Model: The ticket layout selection is only valid for combustion analysis and can be chosen among
Complete, Partial and Total. Tickets for draft, smoke and ambient gas concentration only allow a
specific layout. Layouts for combustion analysis are specified as described in the following:
Full: includes a header with company data as well operator data previously programmed in
the configuration menu, measurements sampled in the combustion analysis and, when
sampled, the draft, smoke and CO - NO ambient gas values.
Partial: only reports the combustion analysis measurement values and information, without any
header, comments or blank lines for operator comments.
Total: is arranged with the complete layout of the average analysis followed by the single
analysis measurements report.
Print test:
Prints a graphical/alphanumeric test ticket for a complete check of the printer operation.
Printer type:
Selects the printer type: infrared or Bluetooth.
When infrared printer is selected a further choice for the printing mode is allowed: fast or slow (Select 'slow' in
order to make the printing process compatible when an HP IR printer is used).
When Bluetooth printer is selected a pairing procedure will be needed in order to match the printer to the
instrument. The pairing procedure has to be performed only once.
To Next Page
Loading...
