27
K800000000EJ 020650A0 170512
4.10 Instrument configuration menu
This menu is used to configure the instrument’s reference parameters described below:
Bluetooth (optional):
Through this sub menu the user can turn on and off the instrument Bluetooth wireless communication with a PC
or PDA.
Calibration
It is possible to make a recalibration of the instrument’s gas sensors with suitable known concentration gas
cylinders. Recalibration of Oxygen (O
2
) sensor is not available since it is already recalibrated during every
autozero sequence. See 'MAINTENANCE' section.
Display contrast:
The display contrast may be increased or decreased by acting on cursor keys . This operation may
be performed even when the introductory screen is active.
Time/Date:
This allows the current time and date to be set. The user can select the date and hour format either in EU
(European) or USA (American) modes.
Micromanometer
Allows to configure the micromanometer input (optional) as P+ or P- port. In case P- is selected, the sign of
pressure is inverted.
Buzzer
This sub-menu allows the operator to activate or deactivate the instrument buzzer.
Language
This sub-menu permits to select the desired language for the visualization of the various menus and the report
printing.
WHEN THE INSTRUMENT BLUETOOTH INTERFACE IS TURNED ON, THE BATTERY LIFE
IS REDUCED DOWN TO 10 HOURS.
To Next Page
Loading...
