Eads Two-Way Radio User Manual

Menu functions
100
If the battery is removed from the radio for a long time or if the
battery is completely empty, you may need to set the time and date
again.
Aliasing
You can inform the network that you are using a particular radio by
selecting
Menu → Settings → Aliasing → Login or selecting Go to →
Aliasing login and entering your radio user number. If you do not
enter your radio user number,
Incorrect radio user number is
displayed. After you have entered the radio user number, the radio
asks for your radio user PIN code. If a radio user PIN code is not
needed, just press
OK . If the login is successful, Aliasing login
accepted
is displayed. If the login fails, Aliasing login failed. Re-login
again?
is displayed. If you select Yes , the Aliasing starts again. To
exit the
Aliasing, select No . Note that the network can also initiate
aliasing login.
When aliasing login is about to end,
Aliasing login is about to end.
Re-login again?
is displayed. Select
Yes or No . When the network
cancels aliasing login,
Aliasing login ended. Re-login again? is
displayed. Select
Yes or No .
In a situation where the network changes the radio user number,
either
RUN changed to: or RUN changed to unknown number is
displayed. In both cases you can either accept or reject the new
number by pressing
Accept or Reject.
You can log out from aliasing by selecting
Menu → Settings →
Aliasing → Logout or selecting Go to → Aliasing logout and entering
your radio user number. After you have entered the radio user
number, the radio asks for your radio user PIN code. If a radio user
PIN code is not needed, just press OK . If the logout is successful,
Logged out is displayed. If the logout fails, Logout failed is displayed.

Eads Two-Way Radio Specifications

General

Brand	Eads
Model	Two-Way Radio
Category	Two-Way Radio
Language	English