Eads Two-Way Radio User Manual

Contacts
75
The first number saved under a name is automatically set as the
default number. When you select a name from Contacts, for
example, to make a call, the default number is used unless you
select another number. The default number is indicated by a box
around the number type indicator (for example, ).
1. Select
Menu → Contacts → Add new contact.
2. Enter the name, and press
OK .
3. Enter the area code and the phone number, and press
OK .
4. Select one of the following number types:
• Private ( ) for a TETRA number other than an abbreviated
TETRA number
• Abbr. number ( ) for an abbreviated TETRA number
• Phone ( ) for a public telephone network number
• Office ext. ( ) for an office extension number
5. When the name and number are saved, press
Done .
Tip: To save a phone number in the idle mode, enter the
phone number, and press Save .
p Search for names
1. Press Names , and enter the first characters of the name you are
searching for. Or, select
Menu → Contacts → Search. Enter the
first characters of the name you are searching for, and press
Search .
2. Scroll to the name you want.
3. When the desired name is highlighted, you can call the default
number. To make a phone call, press . To make an express
call, press and hold the PTT key. Note that express calls can be
made to TETRA network and public telephone network numbers.
If multiple numbers have been saved for the name and you want
to call one of the other numbers, first press
Details , and scroll to
the number you want to call.

Eads Two-Way Radio Specifications

General

Brand	Eads
Model	Two-Way Radio
Category	Two-Way Radio
Language	English