Eads Two-Way Radio - Time and Date Settings

Menu functions
99
radio supports JPEG, GIF, WBMP, BMP, OTA-BMP, and PNG
formats, but not necessarily all variations of these file formats.
To select a wallpaper from
Gallery, select Select wallpaper. To
activate or deactivate the wallpaper, select
On or Off,
respectively. The wallpaper is not displayed when the radio
activates the screen saver.
• Screen saver — to activate or deactivate the screen saver, select
On or Off, respectively. To set the time after which the screen
saver on the display is activated, select
Time-out.
• Menu view — t o set the way the radio displays the main menu.
Select
List for the menu list view, and Grid for the menu grid view.
• Brightness — to make the display brighter or darker.
Time and date settings
Select Menu → Settings → Time and date settings, and select one of
the following:
• Clock — to change time settings. Select Show clock to display the
time in the idle mode, or
Hide clock to hide it. Select Set the time
to adjust the clock to the correct time,
Time zone to select the
time zone, and
Time format to select the 12-hour or 24-hour time
format.
• Date — to change date settings. Select Show date to show the
date in the idle mode, or
Hide date to hide it. Select Set the date
to change the date. You can also select the date format and date
separator.
• Auto-update of date & time — to synchronize the time. Your
organisation can define if the terminal synchronizes to Network
time, GPS time, or both. Select
On to synchronize the clock
automatically. Select
Confirm first if you want to confirm
synchronization manually. If you don't want the clock to be
synchronized at all, select
Off.