Eads Two-Way Radio User Manual

Positioning
66
The second display contains the approximate altitude from the mean
sea level. If the device is moving, the approximate speed and the
approximate direction of the movement in degrees from true north
are also shown.
The third display contains the approximate time of the measurement
in Universal Time (UTC) format and the number of satellites the
radio is connected to (maximum 12).
The text on top of the display informs you of the status of the GPS
receiver. If No GPS fix is displayed, the GPS receiver is calculating
its location or not receiving information from the satellites, and the
correct coordinates cannot be displayed. The coordinates of the
previous calculated position remain on the display until new position
information is received from the satellites.
If
2-D positioning is displayed, the coordinates are displayed, but the
receiver cannot calculate the altitude, because it is only receiving
information from three satellites. If
3-D positioning is displayed, the
receiver is receiving information from a minimum of four satellites,
and the coordinates and the altitude can be calculated.
If you want to save the displayed position information as a waypoint,
select
Save . Enter a name, and if desired, a short comment for the
waypoint.
Waypoints
In the Position info submenu, you can save part of the position
information as a waypoint for later use. You can save up to
100 waypoints. You can also save waypoints received in a text
message. See Read text messages on page 88.
To view the list of saved waypoints, select
Menu → Positioning →
Waypoints. Scroll to the desired waypoint, and press Options for
the following options:
• Delete — to delete the waypoint.
• Delete all — to delete all saved waypoints.

Eads Two-Way Radio Specifications

General

Brand	Eads
Model	Two-Way Radio
Category	Two-Way Radio
Language	English