Using your radio
37
p
Fast menu
The fast menu contains frequently-used menu functions. To access
the fast menu, press the fast menu key .
Your organisation can define which of the following items are shown
in the fast menu:
•
Network mode or Direct mode, depending on the current setting.
•
Scanning on or Scanning off, depending on the current setting.
This option affects the scanning setting in the currently active
mode (network mode or direct mode).
•
Group calls on or Group calls off, depending on the current
setting.
•
Barring on or Barring off, depending on the current setting.
•
A maximum of seven profiles. See Profiles on page 92. The
Monophone profile is available only in Profiles and in the power
key menu. See Profiles on page 92.
•
A maximum of 10 situation indicators.
If it has been predefined that the fast menu is empty,
No items in fast
menu
is displayed when you access the fast menu. By default, the
fast menu includes the following items:
•
Scanning on or Scanning off, depending on the current setting.
This option affects the scanning setting in the currently active
mode (network mode or direct mode). If you do not have access
rights to change the scanning setting, this item is not shown.
•
Network mode or Direct mode, depending on the current setting.
•
The General and Silent profiles.
•
The first five situation indicators, if these are predefined in the
memory of the radio.
Activate a fast menu item
1. In the idle mode, press the fast menu key , and scroll to the
desired item with the scroll keys or by pressing quickly.
To Next Page
Loading...