Eads Two-Way Radio - Call Settings; Anykey Answer; Summary after Call

Menu functions
93
To activate a profile, press quickly in the idle mode, and select
the desired profile.
Customise profiles
1. Select Menu → Settings → Profiles.
2. Scroll to the desired profile, and select
Options → Personalise.
3. Select from the following settings:
Incoming call alert, Ringing
tone
for two-way phone calls, Push-to-talk ringing tone for one-
way phone calls,
Ringing volume, Vibra option, Message alert
tone
, Status message alert tone, Flash message alert tone,
Keypad tones, Warning tones, Audio setting for setting the active
speaker and microphone,
Alert for for setting the radio to ring only
for calls from a selected caller group (see Caller groups on
page 79),
Voice feedback, Lights, and Light indicator.
Note that even if
Top microphone or External speaker is selected
in
Audio setting, to improve the voice quality, the bottom
microphone is used in two-way calls when the loudspeaker or
external speaker is active.
Call settings
Anykey answer
When this function is activated, you can answer a phone call by
briefly pressing any keypad key, except for , , and
. Select
Menu → Settings → Call settings → Anykey answer → On
or
Off.
Summary after call
When this function is activated, the radio briefly displays the
approximate duration of the last two-way phone call. Select
Menu → Settings → Call settings → Summary after call → On or Off.
Note: The actual invoice for calls and services from your service
provider may vary, depending upon network features, rounding-off
for billing, taxes and so forth.