(For 3kW Only) Set up the Control Console
1. Assemble the monitor.
Take out the monitor from the accessories pack, assemble it onto the control console frame, and
connect the cables.
2. Put the keyboard, mouse and the handheld remote on the console.
3. Assemble the alarm indicator.
Remove the back cover of the panel box, assemble the alarm indicator, connect the wires, and then put
the cover back.
4. Connect the computer.
Open the left access panel on the front of the machine, take out the computer from the package,
connect the cables, and then close the panel.
To Next Page
Loading...
