CypCut Basics
The CypCut software is your portal between your parts files and the laser system. We will go through the
workflow and basics of CypCut in this section.
Workflow
1. Import or construct parts.
2. Nest parts.
3. Set technology.
4. Check technology.
5. Machining.
Import or Construct Parts
If you construct your parts with another CAD-system (e.g. AutoCAD), just import them into CypCut.
In File menu, click on Import, and then click on the subitem according to the format of the parts file, to
import the parts.
To Next Page
Loading...
