Button Label Function
Fast
Press the Fast button down first, then press the jog buttons (the Fast button
can be released then) to move the laser head in a faster speed, which is set
in CypCut.
Step
Press the Step button down first, then press the jog buttons (the Step
button can be released then) to move the laser head in a fixed distance,
which is set in CypCut.
Zero
Fn
To move the laser head back to its home position.
Edge
Seek
Fn
To start the edge seeking process.
Fn The Fn button, short form for function, is a modifier button.
K1 / K2
/ K3 /
K4 / K5
/ K6
User defined buttons.
To Next Page
Loading...
