Get to Know the Components of the Laser System
The EV-30 industrial fiber laser cutting system is composed of a machine, a control console, a fiber laser (pre-
installed inside the machine for 3kW lasers), a chiller, two exhausts (only one stronger exhaust for 6kW lasers),
a voltage regulator, a transformer, and a set of appropriate assist gas (prepared by customers).
The picture below shows the schema of the laser system in the recommended footprint configuration for 3kW
lasers. For a 6kW laser system, the fiber laser will stand alone in front of the chiller.
To Next Page
Loading...
