Safety
Laser Safety
Lasers use intense beams of light to create heat and fire as a normal part of their operation, and depending
on the laser, the light might not be visible to you. If the proper safety measures are ignored, you could burn
or blind yourself or someone else, or start a fire that could damage or destroy the building in which the laser
system is housed.
IMPORTANT
ALWAYS wear protecting glasses while doing laser processing.
WARNING
DO NOT aim and fire laser on anything but the workpieces you want to process.
WARNING
DO NOT leave a running laser unattended.
The visible output beam of the Laser Diode Pointer (Red Dot Pointer) is accessible to the operator. While this
device employs the same technology as the familiar laser pen-pointers, like them it is potentially hazardous if
its beam is directed into the eye.
WARNING
DO NOT view directly into the beam of the Laser Diode Pointer (Red Dot Pointer).
Electrical Safety
The AC input power to the machine is potentially lethal and is fully contained within the cabinet.
WARNING
DO NOT open any of the machine's access panels while the unit is plugged in. Opening a panel may
expose the operator to the unit's AC input power.
WARNING
DO NOT make or break any electrical connections to the machine while the unit is turned on.
To Next Page
Loading...
