2. In the sign in window, click the password field containing the 4 dots.
Figure 33: Sign in window with the password field
3. Enter the password 0101 and press
.
4. Select Continue.
5. Select Configuration and then Relays Outputs.
Figure 34: Selecting Relay Outputs in the Configurations screen
© Eaton Corporation plc 2020. All rights reserved. Revision: 001 Document ID: P-164000956 85 (141)
Eaton 93PM G2 UPS 50 – 360 kVA User’s and Installation Guide
To Next Page
Loading...
