Eaton 93PM G2 Series - Page 86

6. Select from these options:
• Native (Alarm) relay
It is possible to set 8 different events for the native relay. If any of the set
events occurs, the relay is activated
• MiniSlot 1
• MiniSlot 2
• MIniSlot3
• MiniSlot 4
Figure 35: Options for relay outputs configuration
7. Enter the code(s) of the function(s) that you want to trigger the relay when
they become active.
© Eaton Corporation plc 2020. All rights reserved. Revision: 001 Document ID: P-164000956 86 (141)
Eaton 93PM G2 UPS 50 – 360 kVA User’s and Installation Guide