Log Messages
Page 118
User reset partition remotely.
User reset system remotely.
Remote control belonging to user
has low battery.
A remote service call failed all
attempts.
A remote service call succeeded.
Hold Up Alarm raised at radio
keypad n.
Social Care alert raised at radio
keypad n.
Incorrect code length entered at 1-
way radio keypad.
The system was restored after a
user keyed in the wrong code
more than four times in a row at
radio keypad n.
Radio keypad n has been
tampered by excess key presses.
Radio keypad n has low battery.
Radio keypad n has medical
alarm.
Radio keypad n supervision OK.
Radio keypad n about to fail
supervision.
Radio keypad n failed supervision.
Radio keypad n supervision
restored.
Tamper on radio keypad n
restored.
Tamper on radio keypad n.
Radio jamming detected at radio
keypad base station n.
Radio jamming removed at radio
keypad base station n.
Low voltage restored at radio
keypad base station n
Low voltage at radio keypad base
station n
Tamper at radio keypad base
station n.
Tamper restored at radio keypad
base station n.
Low battery Restored on Internal
Radio Sounder n.
Fault restored on External Radio
Siren n.
Fault on External Radio Siren n.
Jamming Restored on External
Radio Siren n.
Jamming on External Radio Siren
n.
Low battery on External Radio
Siren n.
Radio signal restored for External
Radio Siren nn.
Radio signal lost for 20 min for
External Radio Siren nn.
Radio signal fail for 2 hours for
External Radio Siren nn.
Radio signal restored for External
Radio Siren nn.
Tamper Restore on External Radio
Siren n.
Tamper on External Radio Siren n.
Secondary communications path
has a fault.
Secondary communications path
fault restored.
The system was set with zone nn
shunted
User nn de-activated shunt group
n.
User nn activated shunt group n.
Excess keys tamper from SMS
message restored.
Excess keys (code attempts)
tamper from SMS message.
Zone on soak test failed.
Zone on soak test tampered.
Social-care alert issued from
keypad.
Social-care alert caused by
inactivity at monitored zones.
Social Care pendant assigned to
User N has a low battery.
The installer has loaded a different
version of the control unit's
operating software.
All speech dialler destinations
acknowledged calls.
Speech dialler destination did not
acknowledge call.
Speech dialler destination
acknowledged call.
Speech dialler made test call.
Supervision failed for radio
detector at zone.
Supervision restored for radio
detector at zone.
Control unit 12V supply failed.
Control unit 12V supply restored.
Control unit has fault in main
processor.
The system restarted after a
power fail (mains and battery).
Tamper at keypad restored.
Tamper at external reader n
restored.
Tamper at external reader n.
Technical alarm on zone restored.
User nn changed their password.
User nn changed programming
configuration.
User nn deleted another User nn
from system.
Downloader session failed.
User nn keyed in a Duress code to
unset the system (part setting
system).
User nn keyed in a Duress code to
set the system (part setting
system).
M2M, SMS Control or virtual
keypad logon.
User nn has triggered a medical
alarm from pendant
User nn logged out of Installer
Menu from web server.
User nn left Installer mode.