System Options Menu
Page 79
Note: The upgrade may default the control unit's configuration settings. Before using
Panel Upgrade, it is recommended that you back up the system configuration using the
Downloader software or the web interface.
Note: If you need to update both the language files and firmware, make sure you
update the language files first. Failure to do this may display an “incompatible
language file” message, from which you cannot proceed.
Selecting a file begins the upgrade process. During the upgrade, the control unit will restart
and the keypad's navigation LEDs may flash red. After the upgrade, the keypad returns to
normal standby mode.
SD Card
Before removing a micro-SD card from the control unit, you must use System Options/SD
Card/Safely Remove Hardware. After re-inserting the card, select System Options/SD
Card/Enable Hardware. Failure to use this procedure may corrupt the card or cause it to
malfunction.
To Next Page
Loading...
