Getting Started
Page 13
6. Specify whether a second battery is fitted:
BATTERY 2
Disabled
Enabled
7. Select the wiring type you intend to use for wired zones (page 6):
WIRED ZONE TYPE
2-wire FSL 2K2/4K7
2-wire FSL 1K/1K
2-wire FSL 2K2/2K2
2-wire FSL 4K7/4K7
4-wire CC
2-wire CC
You can change the control unit's wiring type through Installer menu – System
Options.
8. Specify an installer code:
NEW INSTALLER CODE
When prompted, confirm the code. DO NOT FORGET THIS CODE!
9. You will see the date and time at the top of the standby screen. For example:
10:15 Fri 01/01/2016
i-on Style-EU
10. Enter the Installer code to enter the Installer menu.
11. Use the Installer menu to carry out the required configuration tasks, such as to:
Program zones.
Configure outputs.
Configure setting options.
12. Exit the Installer menu (page 15).
To Next Page
Loading...
