Eaton i-on Style - Page 26

Installer Menu Map
Page 18
Internal
Sounders
Add/Del Sounder
Edit Sounder
Int. SNDR 01...
Name
"Int. SNDR nn"
Partitions
Partition 01
Visible only in a partitioned system.
Volume
4
WAMs
Add/Del WAM
Edit WAM
Cameras
IP Cam 1...
Camera Triggers
None
Zone Follow
Zone Alarm
Trigger Partitions
All Partitions
Visible only in a partitioned system.
IP Address
HTTP Port Internal
80
2 Outputs
Radio outputs
Add Outputs
Edit Outputs
EDIT RADIO O/P 1...
Name
"Output nnn"
Type
Not used
Pulsed
No
Partitions
All outputs allocated to all
Partitions
Visible only in a partitioned system.
Zones
None
Delay
0 seconds
Visible when Pulsed set to “Yes”.
On Time
1 second
Wired outputs
Panel
EDIT output
Name
Type
For dedicated siren and strobe
outputs, "Type" is "Siren" or
"Strobe" (as appropriate) and not
editable.
For odd-numbered panel outputs,
the default "Type" is "Siren". For
even-numbered panel outputs, the
default "Type" is "Strobe".
Polarity
Normal
Pulsed
No
Not available for dedicated siren and
strobe outputs.
Partitions
All outputs allocated to all
Partitions
Visible only in a partitioned system.
Zones
None
Delay
0 seconds
Visible when Pulsed set to “Yes”.
On Time
1 second
Custom
Outputs
Custom Output 1...
Mode
Any (Or)
Inputs
None
3 Setting options (only shown in a part-setting system)
Appears only in a part-setting system.
Full Set
Name
“Full Set”
Exit Mode
Timed Set
Settle Time
15 seconds
Visible only if Exit Mode is “Final Door”,
“Lock Set” or “Exit Terminate”.
Exit Time
40 seconds
Visible only if Exit Mode is “Timed Set”
or “Silent Set”.
Entry Time
40 seconds
Siren Delay
0 minutes
Siren Time
15 minutes
Strobe on Set
Off
Strobe on Unset
Off
Part Set B/C/D
Name
“Part Set B”
Exit Mode
Instant Set
Settle Time
15 seconds
Visible only if Exit Mode is “Final Door”,
“Lock Set” or “Exit Terminate”.
Exit Time
40 seconds
Visible only if Exit Mode is “Timed Set”
or “Silent Set”.
Entry Time
40 seconds