Eaton Powerware 5125 - Plug-Receptacle UPS Installation

OPERATION
EATON Powerware
®
5125 (9910-E65) UPS Installation Guide for IBM
®
Applications S 164201698 Rev 1
32
Table 9. Configuration Mode Indicators and Options
Configuration Mode
Indicators
Option
Indicator
Status
Explanation
200/208V
Nominal Output
V
l
On
(default)
Selecting this option changes the nominal output voltage to
200/208V.
p
Voltage
Flashing
200/208V is disabled; one of the other output voltage options is
selected.
220V Nominal
Output Voltage
On Selecting this option changes the nominal output voltage to
220V.
p
g
Flashing 220V is disabled; one of the other output voltage options is
selected.
230V Nominal
Output Voltage
On Selecting this option changes the nominal output voltage to
230V.
p
g
Flashing 230V is disabled; one of the other output voltage options is
selected.
240V Nominal
Output Voltage
On Selecting this option changes the nominal output voltage to
240V.
p
g
Flashing 240V is disabled; one of the other output voltage options is
selected.
Site Wiring
Fault Alarm
On Alarm sounds when the polarity of the outlet is reversed or the
ground connection is missing; have a qualified electrician
repair the outlet wiring.
Flashing
(default)
Alarm DOES NOT sound when the polarity of the outlet is
reversed or the ground connection is missing.
0EBMs
On
(default)
Zero EBMs are configured.
Flashing One of the other EBM configurations is selected.
1EBM
On One EBM is configured.
Flashing One of the other EBM configurations is selected.
2EBMs
On Two EBMs are configured.
Flashing One of the other EBM configurations is selected.