Eaton Powerware 9355 - Page 20

UPS SETUP
EATON Powerware
®
9355 UPS (20/30 kVA) Installation and Operation Manual S 164201626 Rev B www.powerware.com
14
4. Remove the front door to access the front shipping bracket (see page 10).
5. Remove the four M8 screws securing the front shipping bracket to the cabinet
(see Figure 6).
6. Remove the two M10 bolts securing the front shipping bracket to the pallet and
remove the bracket.
M8 Screws
M10 Bolts
Figure 6. Removing the Front Shipping Bracket (UPS Shown)
7. Replace the front door.