Eaton Powerware 9355 - Page 21

UPS SETUP
EATON Powerware
®
9355 UPS (20/30 kVA) Installation and Operation Manual S 164201626 Rev B www.powerware.com
15
NOTE Be sure to support the front and back of the cabinet when rolling it off the pallet to prevent tipping
or rolling away.
8. Raise the leveling feet so that they do not touch the pallet.
Figure 7. Raising the Leveling Feet
9. Slowly roll the cabinet toward the rear of the pallet. Once the pallet tilts, continue
rolling the cabinet down the pallet until the cabinet touches the floor (see
Figure 8).
Figure 8. Unloading the Cabinet (UPS Shown)