Eaton SC200 - Sc100; Sc200; Starting the SC200 or SC100

System Controller
Copyright © 2008 Eaton Corporation. All Rights Reserved.
IPN 997-00012-56C September 2008
37
Starting the SC200 or SC100
When dc power is applied to the SC200 or SC100 (via the RXP connector YS11) the start-up
sequence begins.
SC200

Approx.
60s


Start-up screen Summary screen Main menu
All active alarms are
displayed.
See details on page 61.
SC100

Approx
20s
Start-up screen First status screen Main menu
All active alarms are
displayed.
See details on page 62.