Eaton SC200 - Equipment and Tools; Safety Equipment; Essential Tools; Recommended Tools

Appendix D
Equipment and Tools
4
Copyright © 2008 Eaton Corporation. All Rights Reserved.
IPN 997-00012-56C September 2008
65
Appendix D
Equipment and Tools
Safety Equipment
Use approved safety equipment as required by local health and safety regulations including
(but not restricted to):
• Safety glasses
• Safety gloves
• Safety footwear
• Appropriate handling equipment for batteries and other heavy items
• Appropriate platform(s) and access for working at height (if required)
Essential Tools
Standard electrical toolkit with insulated tools, plus:
• Torque wrench
• Torque screwdriver with insulated handle
• Digital multimeter
• Insulation tester
Recommended Tools
• Laptop with:
• USB port and USB A/B cable (see Spare Parts on page 66) - for EPS2/EPS5 systems
with SC200 system controller, or
• RS232 port and null-modem cable (see Spare Parts on page 66) - for EPS2/EPS5
systems with SC100 system controller.
• DCTools software (download from www.powerware.com/downloads).
• Labeling tool and labels