Eaton SC200 - General Description

General Description
Copyright © 2008 Eaton Corporation. All Rights Reserved.
IPN 997-00012-56C September 2008
3
Front Views
"
Rectifier modules (see details on page 5). 1 or 2
in EPS2 models, up to 5 in EPS5 models.
(Use Rectifier blank panel RM3B-A01 to cover
an un-used rectifier position)
#
Battery circuit breaker 1 (connected to battery
connector 1 on rear)
$
Battery circuit breaker 2 (connected to battery
connector 2 on rear)
%
Load circuit breakers 1-10 (connected to load
terminals 1-10 on rear)
!
SC200 or SC100 system controller (see details
on page
5)
&
Circuit breaker cover
3
Telecom ground terminal (M5). See details on
page
18.