Eaton SC200 - Equipment Incident Report

Copyright © 2008 Eaton Corporation. All Rights Reserved.
IPN 997-00012-56C September 2008
71
Equipment Inci dent Report
EQUIPMENT INCIDENT REPORT
Please enter as much information as you can. Send the completed form, together with the item for repair to your
nearest authorized service agent. NOTE: Only one fault to be recorded per form.
For further information contact your Powerware dc product supplier or Eaton Corporation, Telecommunications
Solutions Division. See contact details on page 73. Or email: CustomerServiceNZ@eaton.com
Date:
Customer Information
Company:
Postal Address:
Return Address:
(Not PO Box)
Telephone: Fax: Email:
Contact Name:
Location of Failure
Product code: Serial number: Document number:
System type installed in: Serial number:
Site name or location:
Fault discovered
Delivery Unpacking Installation
Initial test Operation after ______ years Other ___________
Failure source
Design Manufacturing Documentation
Transportation Installation Handling
___________
Effect on system operation
None Minor Major _________________
INFORMATION (fault details, circumstances, consequences, actions)
Internal use only.
Reference No: __________ RMA: __________ NCR: __________ Signature: _________________ Date: __________