Enterprise Power Solutions Installation and Operation Guide
42
Copyright © 2008 Eaton Corporation. All Rights Reserved.
IPN 997-00012-56C September 2008
If required, the following site specific information can be stored in the SC200 or SC100 to
assist site management.
Parameter Description Where to find:
System
Manufacturer
The manufacturer of the dc power
system.
System Type The EPS2/EPS5 model number.
System Serial
Number
The EPS2/EPS5 serial number.
System Location Location of EPS2/EPS5 at the site.
Site Name Name of the site.
Site Address Address of the site.
Site Notes Any notes relevant to site access,
location or other matters.
Contact Contact name, phone number, etc.
Configuration
Name
Reference name of the configuration
file in the SC200 or SC100.
DCTools/Web:
Configuration > Identity
To Next Page
Loading...
