MAINTENANCE
6.3. RECOMMISSIONING
Once all parts of the service kit have been replaced on the XRGI
®
system
and the latest software version has been played on all components, close
the Power Unit and reinstall the rear cover of the Power Unit.
Recommission the XRGI
®
system
by:
- Connecting the Q-Heat Distributor to the power supply.
- Opening the gas supply to the Power Unit.
- Switching on the XRGI
®
system on the iQ-Control Panel.
Q-Heat Distributor Gas valve Main switch
Fig. 6.36 Fig. 6.37 Fig. 6.38
To Next Page
Loading...
