PREVENTIVE MAINTENANCE OF THE WEAR PARTS
STEP 4 – XRGI® ACCESSORIES
Q-Network modules Power factor corrector
POS COMPONENT DESCRIPTION
1 Q-Network Inspect all Q-Network modules for correct function.
2 Power factor corrector
Inspect the compensator and the protection in the power factor corrector for correct
function.
STEP 5 – CLEANING
POS COMPONENT DESCRIPTION
1 Gas & water filter Clean the gas and water filter on the secondary circuit.
2 XRGI
®
system & components Clean the XRGI
®
system and its components.
Clean the casing of the XRGI
®
system with a damp cloth and a little soap. Do not use any abrasive or cleaning agents that could damage
the casing or the plastic operating elements.
Fig. 8.10
Fig. 8.11
To Next Page
Loading...
